- Sloped and insulated drain pan
- Primary and secondary drains
- Easy service access
- 240/24V relay/transformer
- Copper tube coils
- Factory installed electric heat (except 0 kW)
The space-saving HX Series fan coil is only 10" high (11" with enclosure), allowing it to recess in a ceiling. Recessed ceiling fan coils save valuable floor space and eliminate costly "equipment" closets.
The HX series is compatible with most split-system condensing units and heat pumps
First Co's customer is ultimately responsible for confirming which fan coil models are compatible with selected outdoor unit(s) and which expansion valves (if any) are required. To determine certified indoor/outdoor matches, go to www.firstco.com or contact the factory.
All HX fan coils include a 240/24V transformer and are completely prewired with 0 to 10 kW of electric heat. A sloped drain pan allows positive drainage of condensate.
For HX fan coils factory installed within an enclosure, add "-C" after the kW in the model number. For instance, ordering model 18HX5-C will include an 18HX5 factory installed in a # 9EHX01 enclosure and your choice of either a solid or louvered panel.
|Weight||58 Pounds (lbs)|
|Width||37.25 Inches (In)|
|Height||10 Inches (In)|
|Country of Origin||USA|
|UPC or Barcode||N/A|
|EPA Cert Required||No|
|Length||21 Inches (In)|
|Electric Heat Range [kW]||5|
|Liquid Line Size||3/8"|
|Maximum Fuse Size||25,30|
|Minimum Circuit Amps||25,25|
|Nominal Electric Heat (kW)||5|
|Suction Line Size||5/8"|