LT - 2% air leakage, tin plated indoor coil hairpins and louver metal outdoor grille.
TP - Base unit with tin plated indoor coil hairpins (Single Phase Only)
Only used if ordering an option
Single-Packaged Products with Energy-Saving Features and Puron® refrigerant.
- Up to 14.5 SEER
- Up to 12.0 EERS
- 8.0 HSPF
- ECM Motor-Standard
- Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1-in.W.C. with all present air inlets, air outlets, and condensate drain port(s) sealed.
FEATURES / BENEFITS
One-piece Heat Pump unit with optional electric heater, low installation cost, dependable performance and easy maintenance.
Efficient operation High-efficiency design with SEERs (Seasonal Energy Efficiency Ratio) of up to 14.5.
Puron Environmentally Sound Refrigerant is Carrier’s unique refrigerant designed to help protect the environment. Puron is an HFC refrigerant which does not contain chlorine that can harm the ozone layer. Puron refrigerant is in service in millions of systems,proving highly reliable, environmentally sound performance.
Factory-assembled package is a compact, fully self-contained,heat pump unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard capacity ranges with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Durable, dependable components
Scroll Compressors are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection.
ECM Motor is standard on all models. Direct-drive, PSC(Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooling operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field installed accessory.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal baserails provide added stability as well as easier handling and rigging.
Thermostat Controls designed to work as a system with Carrier’s small packaged product.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier.
High and Low Pressure Switches provide added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 73dBA.
Easy to service cabinets provide easy 3 panel accessibility to serviceable components during maintenance and installation. The base with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. wide perimeter flange makes frame mounting on a rooftop easy.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow with the two standard duct covers. Downflow operation is easily provided in the field to allow vertical ductwork connections. The basepan utilizes seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Cabinets are constructed of heavyduty, phosphated, zinc-coatedprepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator and electric heater compartments are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality.(Conforms to American Society of Heating, Refrigeration and Air 2 Conditioning Engineers No. 62P.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Short-Cycling protection for the compressor is incorporated into our defrost control board ensuring a five minute delay (+/-2minutes) before restarting compressor after shutdown for any reason.
|Weight||311 Pound (lb.)|
|Width||48.1875 Inches (in)|
|Height||47.75 Inches (in)|
|Country of Origin||MEX|
|UPC or Barcode||1P50VT-C24---3-TP|
|EPA Cert Required||No|
|Length||32.625 Inches (in)|
|Blower Motor HP||1/2 HP|
|Blower Type||Forward Curved|
|Blower Wheel||10" x 10"|
|Condenser Motor HP||2 1/4 HP|
|Condenser Motor RPM||810|
|Cooling Rated Capacity Btu/h||24000|
|Equipment Type||Heat Pump|
|Filter Size||20" x 12" x 1"|
|Full Load Amps||0.6|
|Locked Rotor Amps||58.3|
|Maximum Fuse Size||30|
|Metering Device||Indoor TXV, Outdoor Dual Accuraters|
|Minimum Circuit Amps||21.3|
|Number of Fan Blades||1|
|Rated Load Amps||13.5|
|Sound Level (dBA)||74|