Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Click here for our 2017 Spring Training Calendar

Payne® 80% AFUE 45,000 Btuh Multipoise Gas Furnace Series G

Item: PG8MEA024045
MFR: PG8MEA024045

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.
Decrease quantity
Increase quantity

Product Info

Description

THE PAYNE LEGACY™ 80 GAS FURNACE
The PG8MEA/JEA 4-way Multipoise Gas Furnaces offer deluxe features not found in other single-stage 80% gas furnaces. The highly efficient ECM motor and Payne’s control logic combine to provide a SEER increase to your air conditioning unit of up to 1.5 points.*
*As compared to the Air Conditioning Heating and Refrigeration Institute’s standard coil -only rating when paired with selected evaporator coils.
The gas furnace control system provides a dehumidification mode and a motor speed selection for continuous fan operation selectable at the thermostat. Applications are easy with 4-way multipoise design, through-the-furnace downflow venting, 13 different venting options, and an overall design for easy service
access. The PG8MEA/JEA furnaces are approved for use with natural or propane gas, and the PG8JEA is approved for use in Low NOx Air Quality Management Districts.

STANDARD FEATURES
  • Humidity control when using a humidity sensing thermostat
  • Adjustable constant fan speed from the thermostat
  • Certified to leak 2 percent or less of its nominal air conditioning CFM delivered when pressurized to 1-In. Water Gauge with all present air inlets and air outlets sealed.
  • LED diagnostics and self test feature
  • Stores fault codes during power outages
  • Adjustable heating air temperature rise
  • Adjustable cooling airflow
  • Dehumidification terminals on control board
  • 4-way Multipoise furnace, 13 vent applications
  • Hot surface ignition
  • Draft safeguard switch to ensure proper furnace venting
  • Dual fuel compatible (including 13.0 SEER Heat Pumps)
  • All models are chimney friendly when used with accessory vent kit

Specifications

Weight104 Pound (lb.)
Width14.1875 Inches (in)
Height33.25 Inches (in)
Country of OriginVar
UPC or Barcode1PPG8MEA024045
Hazardous MaterialNo
EPA Cert RequiredNo
Length29 Inches (in)
AFUE80%
Air FlowMulti-Position
Blower Motor HP1/2 HP
Blower Motor RPM1050
Blower Motor Speeds5
Blower Motor TypeECM
Blower Wheel10" x 6"
BrandPayne
BTU Input44000
BTU Output36000
CFM1035
CFM Cooling1035
CFM Heating735
Cycle/Hertz60
Equipment TypeFurnace
Fuel TypeNatural Gas or LP
Full Load Amps6.8
Gas Connection1/2" [12.7 mm] N.P.T.
Ignition TypeHot Surface
ISO CodeUS
Maximum Fuse Size15
Number of Speeds5
PhaseSingle
Product FamilyPG8MEA
StageSingle
TierBase
Tonnage2
Voltage115 VAC

Documents

Equipment Part List

Loading...
Shop all compressors