Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Payne® - 5 Ton, 15 SEER, Residential Heat Pump Condensing Unit (Dense Grille)

Item: PH15NB06000G
MFR: PH15NB06000G

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
Equipment part list is available.
What’s the price?
Sign in for pricing.
Decrease quantity
Increase quantity

Description

15 SEER Split System Heat Pump with R-410A Refrigerant;

PERFORMANCE:
All models are verified for efficiency and capacity by AHRI.

ELECTRICAL RANGE:
All units are offered in 208/230--1, single phase.

FAN MOTOR:
The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years. The permanent split capacitor type motor was designed for optimum efficiency. The motor was then qualified under extreme conditions to help ensure a long, reliable life.

CABINET:
A weather protective cabinet of prepainted steel is protected underneath by a galvanized coating and treated with a layer of zinc phosphate for a finish that will last for many years. All screws on cabinet exterior are coated for a long--lasting, rust--resistant, quality appearance.

UNIT DESIGN:
The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and condenser air up and away from adjacent patio areas and foliage. The base pan is designed for easy removal of water, dirt, and leaves.

DEFROST CONTROL BOARD:
Incorporates defrost relay, defrost timer, and low voltage terminations. The defrost control is a time/temperature initiation/termination control which includes three field--selectable time periods of 30, 60 and 90 minutes.

COMPRESSOR:
Each compressor is protected with internal temperature and current sensitive overloads. An internal pressure relief valve provides high pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug.

SERVICE VALVES:
Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.

SERVICEABILITY:
One access panel provides access to electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.

Documentation

Specifications

Weight294 Pound (lb.)
Width35 Inches (in)
Height39.125 Inches (in)
Country of OriginVar
UPC or Barcode1PPH15NB06000G
Hazardous MaterialNo
EPA Cert RequiredNo
Length35 Inches (in)
BrandPayne
CFM4046
Condenser Motor HP1/4 HP
Cycle/Hertz60
Energy Star RatedYes
Equipment TypeHeat Pump
ISO CodeVaries
Liquid Line Size3/8"
Maximum Fuse Size50
Minimum Circuit Amps34.2
Motor TypePSC
Number of Fan Blades1
PhaseSingle
Product FamilyPH15NB
RefrigerantR-410a
SEER15
Sound Level (dBA)74
StageSingle
Suction Line Size1 1/8"
TierBase
Tonnage5
UL ListedYes
UL RecognizedYes
Voltage208-230 VAC

Equipment Part List

Loading...
Shop all compressors