524J = Bryant Fan Coil Puron® R-410A Refrigerant
E = 208/230/460-3-60
12 = 10 Tons
A = Standard DX Coil
0 = Standard single speed motor controller
0 = Not Used
0 = Not Used
A = Copper Tube / Aluminum Fin
2 = Std Static, Std Efficient Motor / Med Drive
0 = Not Used
A = Unpainted Cabinet
A = Not Used
A = Standard
Bryant’s versatile packaged air-handling units satisfy design requirements with:
- Multi-position design for horizontal or vertical installation without modification.
- Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improve indoor air quality.
- High-static design meets a wider range of applications than competitive packaged air handler lines.
- Ultra LOW LEAK Economizer accessory provides ventilation air and “free” cooling with built in Fault Detection and Diagnostic (FDD) capabilities.
- Cooling coils with mechanically bonded fins provide peak heat transfer.
- Hot water coil, steam coil, and electric heat accessories are available.
- Standard factory-installed thermo-static expansion valves (TXV) with removable power element.
- Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.
- Optional 2-Speed Indoor Fan Motor system with VFD controller
Easy-to-install and economical 524J units provide reliable service.
The 524J Series air-handling units are the best choice for packaged air handlers. Model 524J units have direct-expansion coils. All models offer excellent fan performance, a unique combination of indoor air quality features, easy installation, and affordable prices. Their versatility and state-of-the-art features will provide economical performance now and in the future.
Indoor air quality features
The unique combination of features in the 524J Series air handlers ensures that clean, fresh, conditioned air is delivered to the occupied space.
Cooling coils prevent the build-up of humidity in the room, even during part-load conditions. Unit sizes of 10 tons and above feature dual-circuit face-split coils.
Two-inch (51-mm) disposable filters remove dust and airborne particles from the occupied space.
Thermal insulation contains an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi. The anti-microbial agent is registered with the U.S. Environmental Protection Agency (EPA).
Pitched drain pan can be adjusted for a right-hand or left-hand connection to provide positive drainage and prevent standing condensate.
The 524J Series packaged air handlers have low initial costs, and they continue to save money by providing reduced installation expense and energy-efficient performance.
Quick installation is ensured by the multi-position design. Units can be installed in either the horizontal or vertical (upflow) configuration without modifications. All units have drain-pan connections on both sides, and pans can be pitched for right-hand or left hand operation with a simple adjustment.
Fan motors and contactors are pre-wired and TXVs are factory-installed on 524J models.
High-efficiency, precision balanced fans minimize air turbulence, surging, and unbalanced operation, thereby cutting operating expenses.
Economizer accessory precisely controls the blend of outdoor air and room air to achieve comfort levels. When the outside air is suitable, outside air dampers can fully open to provide “free” cooling. Economizer is an Ultra LOW LEAK design that includes return and outside air damper leakage that meets California Title 24 section 140.4 requirements. Controller meets California Title 24 Section 120.2 Fault Detection and Diagnostic (FDD) requirements.
Die-formed galvanized steel panels ensure structural integrity under all operating conditions. Mechanically bonded coil fins provide improved heat transfer. Galvanized steel fan housings are securely mounted to a die-formed galvanized steel deck. Rugged pillow-block bearings (14 thru 28 size) are
securely fastened to the solid steel fan shaft with split collets and clamp locking devices. Smaller unit sizes have spider-type bearings.
Model 524J air handling units have galvanized steel casings; inlet and outlet connections are on the same end.
Direct expansion (DX) coils are designed for use with Puron® R-410A refrigerant and have copper tubes mechanically bonded to aluminum sine-wave fins.
Direct-expansion coils include matched, factory-installed thermostatic expansion valves (TXVs) with matching distributor nozzles.
Easier installation and service
The multi-position design and component layout allow for quick unit installation and operation. The DX coils have factory-installed TXVs with matching distributor nozzles. Units can be converted from horizontal to vertical operation by simply repositioning the unit. Drain pan connections are duplicated on both sides of the unit. The filters, motor, drive, TXVs, and coil connections are easily accessed by removing a single side panel.
|Weight||425 Pounds (lbs)|
|Width||48.98 Inches (In)|
|Height||56.059 Inches (In)|
|Country of Origin||MEX|
|Length||28.1023 Inches (In)|
|Air Flow||Not Provided Before Item Discontinued|
|Blower Motor HP||2 1/4 HP|
|Blower Motor RPM||0|
|Blower Motor Speeds||Not Provided Before Item Discontinued|
|Blower Motor Type||Not Provided Before Item Discontinued|
|Blower Wheel||Not Provided Before Item Discontinued|
|Certifications||Not Provided Before Item Discontinued|
|Circuit Breaker - Max Amps||0|
|Circuit Breaker - Min Amps||0|
|Cooling Rated Capacity Btu/h||120000|
|Drain Connection Size||Not Provided Before Item Discontinued|
|Electric Heat Range [kW]||0|
|Energy Star Rated||No|
|Filter Size||Not Provided Before Item Discontinued|
|Fins per Inch||Not Provided Before Item Discontinued|
|Includes Filter Rack||No|
|Liquid Line Fitting||Not Provided Before Item Discontinued|
|Liquid Line Size||Not Provided Before Item Discontinued|
|Maximum Fuse Size||0|
|Metering Device||Not Provided Before Item Discontinued|
|Minimum Circuit Amps||0|
|Rated Load Amps||0|
|Sound Level (dBA)||0|
|Stage||Not Provided Before Item Discontinued|
|Suction Line Fitting||Not Provided Before Item Discontinued|
|Suction Line Size||Not Provided Before Item Discontinued|