Fieldpiece - The ATC2 K-type pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8" to 2 1/4" jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub cooling measurements. Use the ATC2 for most A/C units. The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple.
Because the jaw is designed for HVAC/R, its clamping ability lets you measure temperatures of pipes that are fixed, at any angle, to walls or other surfaces. The sensor reaches correct temperature within a minute.
Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 180°F (82°C)
Plug: K-type thermocouple male mini plug
Typical stabilization time: less than 60 seconds
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
0.35 Pounds (lbs)
7 Inches (In)
2 Inches (In)
Country of Origin
12 Inches (In)
For Use With
The ATC2 can be used with any of our meters that measure temperature and any thermometer accepting a K-type thermocouple
Equipment Part List
*Must purchase $100 to get 20% discount. Sale ends at midnight CST on Sunday, June 30, 2019. Limited quantities available. Excludes Milwaukee brand products. No rain checks allowed. Not valid on previous purchases.